16/6 tappet followers

Servicing, Repairs & Restoration for your Austins.
Post Reply
Humphrey47
Posts: 31
Joined: Mon Feb 19, 2018 6:46 pm

16/6 tappet followers

Post by Humphrey47 » Fri Apr 20, 2018 8:07 pm

Just made a jig for regrinding the 3/8" radius on the tappet followers. The reason for the radius is in the design of the camshaft which would be a problem inserting into the engine - the designers got over the problem by radiusing the followers. Contact me if you need yours done.

Post Reply